MENUBristol Tuning Tips and Modifications
Maximise your Bristols driving pleasure
Thank you so much for visiting TorqueCars, we love Bristol’s and see quite a few interesting projects.
If you are looking to build the ultimate Bristol then you’ve found the right place.
Our tuning tips and articles for the Bristol cover all the best mods and latest tuning methods to help you build a great modified Bristol.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bristol.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
In a performance engine you should never underestimate the need for adequate cooling.
All water cooled cars work on the principle of water being pumped around the engine and then to a radiator where it releases the heat.
Most water pumps are mechanical and run off the crank.
Tuning for improved MPG
Tuning for economy. With the rising price of fuel one question TorqueCars frequently gets asked is how can a car be tuned for maximum economy. Short of getting the family to push the car everywhere there is a little that can be done to improve fuel economy.
Particulate filters and FAP Performance gains.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
Sports ignition coils and performance coil packs
Lets look at the job of the coil in the spark system and see what it does.
Just as a power transformer converts mains 240 volts into a usable 9 volts for your charger or appliance a coil will increase the voltage.
A car battery/alternator will produce a paltry 12volts, certainly not enough to jump an air gap and create a spark.
An ignition coil raises the voltage in some installations between 20 and up to 40,000 volts and this allows the creation of a spark which can jump the air gap between the plugs.
