Ferrari Tuning Tips and Modifications
Looking at ways to improve the perfection in your Ferrari
Thanks for visiting TorqueCars, we love Ferraris and see so many interesting Ferrari projects.
If you are looking to build the ultimate Ferrari then you’ve found the right place.
Our tuning tips and articles for the Ferrari cover all the best mods and latest tuning methods to help you build a great modified Ferrari.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Ferrari.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Anti lag systems
We look at Anti lag systems in cars and how these keep the turbo spinning ready to provide boost from low RPM speeds. When you lift off the throttle the engine power cuts and the turbo starts to spool down.
From this low spool state there is a delay while the turbo spins up again before it can provide any useful boost. We discuss the advantages and disadvantages of ALS and look at alternative options.
Benefits and drawbacks of engine water injection systemsYou’ve finished tuning up your engine but you find that at full throttle the engine splutters or stalls. When you get the car on a diagnostic you find that the knock sensor is kicking in to protect the engine.
Engine knock is a condition where the fuel inside the engine ignites prematurely and occurs within an engine running at high compression. (It can also be caused by other factors including low octane/poor quality fuel or hot spots within the engine.)
Vernier pulleysTorqueCars give advice and tips on using vernier pulleys setting them up and how changes to the pulley can alter the power band. With a vernier pulley you have the ability to control the advance or retard on your cam timing and move the power band around.
Misfires and problems after tuningWhen an engine is tuned or mapped you may get misfires flatspots or other problems. We look at the causes of these issues and how to diagnose a fault after remapping.