MENUMorgan Tuning Tips and Modifications
Maximise your Morgans driving pleasure
Thanks for visiting TorqueCars, we love Morgans and see so many interesting Morgan projects.
If you are looking to build the ultimate Morgan then you came to the right place.
Our tuning tips and articles for the Morgan cover all the best mods and latest tuning methods to help you build a great modified Morgan.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Morgan.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Morgan owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The valves are like the doorways into the engine and control the flow of the intake air and fuel and then after combustion they control the exit of the exhaust gases.
As you can guess the valve springs work incredibly hard, and as you increase the power of your engine the valve choice is vital.
TorqueCars will now take a look at the many considerations taken into account when selecting valve springs.
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Pistons Crankshafts
When an engine is nicely balanced you can raise the redline, and this is where the peak power lies. If you are planning forced induction upgrades then making sure the bottom end of the engine is as strong as possible is a major consideration.
Blow off valves, dump valves and screamer pipes
Blow off valves and dump valves.
When the throttle is closed (when you lift off the accelerator) in a turbo driven engine there is a build up of pressure as forced air is still coming from the turbo. Lifting off the throttle is a lot like putting a plug in the sink – the flow through is stopped and water would just build up and overflow the sink.
