MENUCaterham Tuning Tips and best mods
Maximise your Caterham’s driving pleasure
Thank you so much for visiting TorqueCars, we love Caterham’s and see quite a few interesting projects.
If you are looking to build the ultimate Caterham then you’ve found the right place.
Our tuning tips and articles for the Caterham cover all the best mods and latest tuning methods to help you build a great modified Caterham.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Caterham.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
How to clean a DPF
When your DPF filter blocks up you face large repair bills, follow our tips to ensure your DPF clears. Some simple driving style tips and additive suggestions will make a massive difference to your DPF filter and promote smooth running of your car.
How to avoid engine knock and pinging
So what exactly is engine knock and how dangerous is it? What causes engine knock and how can it be avoided?
You may notice a knocking or rattling noise from your engine or a sudden loss of power under full throttle.
Immediately back off the throttle and only use low rpm engine speeds until you can get the engine investigated.
The chances are that you are suffering from a condition known as “engine knock”.
Adding a supercharger
We look at adding a supercharger to a NASP (naturally aspirated) engine and focus on the main problem areas and considerations encountered in a tuning project of this scope.
There are lots of pitfalls and this is not a “bolt in on and hope it works” modification as many other things need to be done to make this work safely and reliably.
