MENUDatsun Tuning Tips and Modifications
Maximise your Datsuns driving pleasure
Thank you so much for visiting TorqueCars, we love Datsun’s and see quite a few interesting projects.
If you are looking to build the ultimate Datsun then you’ve found the right place.
Our tuning tips and articles for the Datsun cover all the best mods and latest tuning methods to help you build a great modified Datsun.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Datsun.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
We look at adding a supercharger to a NASP (naturally aspirated) engine and focus on the main problem areas and considerations encountered in a tuning project of this scope.
There are lots of pitfalls and this is not a “bolt in on and hope it works” modification as many other things need to be done to make this work safely and reliably.
DMF vs solid flywheel conversions
We look at the benefits and disadvantages of solid flywheel conversions from a DMF and help you decide which is right for you.
It is our considered opinion that unless a car is used extensively for competition or off road you should stick with a DMF. The additional torque caused by tuning an engine or heavy competition use can quickly destroy a DMF. The solution would be to fit a stronger, higher performance DMF but the aftermarket industry seems geared up to offer solid ones as the upgrade option.
Electric water pumps
In a performance engine you should never underestimate the need for adequate cooling.
All water cooled cars work on the principle of water being pumped around the engine and then to a radiator where it releases the heat.
Most water pumps are mechanical and run off the crank.
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
