Bentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Gearbox Remapping
We look at ways to improve gearchanges on your automatic gearbox. Remapping the gearbox will improve shift times, improve acceleration and provide a more lively drive. So OBD port engine tuning/remapping of modern gearboxes is possible and certainly a mod you should consider.
Boost controllers and remapsBoost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
Lightening the flywheelLightening the flywheel – the flywheel works in a similar way to the wheel in the toy cars you used to rev up and release and let it zoom off. The heavy wheel located between the engine and the gearbox builds up rotational force with speed and momentum.
Effectively storing the energy and helping the car resist changes in engine speed – good for cruising at a steady speed but bad when you need a fast engine response.
Benefits and drawbacks of engine water injection systemsYou’ve finished tuning up your engine but you find that at full throttle the engine splutters or stalls. When you get the car on a diagnostic you find that the knock sensor is kicking in to protect the engine.
Engine knock is a condition where the fuel inside the engine ignites prematurely and occurs within an engine running at high compression. (It can also be caused by other factors including low octane/poor quality fuel or hot spots within the engine.)