Bentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
How to lower the engines compression ratio
Reducing the compression ratio is required if you want to run a high boost supercharged engine. High compression NA (naturally aspirated) engines are quite efficient but when adding forced induction you want to lower the compression ratio.
The compression ratio has a dramatic effect on an engines performance and the problem of knock, (where the air fuel mix prematurely ignites) is controlled to a large degree by the compression ratio.
How to avoid engine knock and pingingSo what exactly is engine knock and how dangerous is it? What causes engine knock and how can it be avoided?
You may notice a knocking or rattling noise from your engine or a sudden loss of power under full throttle.
Immediately back off the throttle and only use low rpm engine speeds until you can get the engine investigated.
The chances are that you are suffering from a condition known as “engine knock”.
Clutch tuning: performance clutch modifications and triple plate clutches setupThe clutch takes the engine power, and puts this down through the drive shaft, to the driven wheels on the road but allows you to disengage the engine whilst performing a gear change.
Contact like this requires a lot of grip and a fast response. The more power you have the harder it is for the clutch to operate.
Vents – adding performance with Bonnet vents.Performance gains are possible with the addition of bonnet vents.
Warm air really does kill performance. This is due to the air intake temperatures being hot and air at high temperatures carries less oxygen.
When driving an engine hard the under bonnet temperatures quickly build up and the engine has no choice but to suck this air in reducing your power.