Maybach Tuning Tips and Modifications
Maximise your Maybach’s driving pleasure
Thanks for visiting TorqueCars, we love Maybachs and see so many interesting Maybach projects.
If you are looking to build the ultimate Maybach then you came to the right place.
Our tuning tips and articles for the Maybach cover all the best mods and latest tuning methods to help you build a great modified Maybach.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Maybach.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Maybach owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Adding NoS nitrous oxide to boost power gains.Giggle gas – something to put a smile on your face. "Giggle Gas – Nitrous Oxide (N20) the power button!" […]
Boost controllers and remapsBoost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
DMF vs solid flywheel conversionsWe look at the benefits and disadvantages of solid flywheel conversions from a DMF and help you decide which is right for you.
It is our considered opinion that unless a car is used extensively for competition or off road you should stick with a DMF. The additional torque caused by tuning an engine or heavy competition use can quickly destroy a DMF. The solution would be to fit a stronger, higher performance DMF but the aftermarket industry seems geared up to offer solid ones as the upgrade option.