MENURolls Royce Tuning Tips and Modifications
Maximise your Rolls Royces driving pleasure
Thanks for visiting TorqueCars, we love Rolls Royces and see so many interesting Rolls Royce projects.
If you are looking to build the ultimate Rolls Royce then you came to the right place.
Our tuning tips and articles for the Rolls Royce cover all the best mods and latest tuning methods to help you build a great modified Rolls Royce.
With the help of our forum members, industry professionals and seasoned car modifiers we present a best practice guide to modding your Rolls Royce.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Rolls Royce owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
Pistons Crankshafts
When an engine is nicely balanced you can raise the redline, and this is where the peak power lies. If you are planning forced induction upgrades then making sure the bottom end of the engine is as strong as possible is a major consideration.
Ceramic exhaust coatings and exhaust wrap
Under bonnet temperatures are one of the biggest performance killers around.
Quite simply, you want your engine to be sucking in cold air as this carries more oxygen and will allow you to burn more fuel.
The exhaust system is one of the contributors to under bonnet temperatures. You can therefore lag the exhaust to help prevent this heat soak into the engine bay.
Clutch tuning: performance clutch modifications and triple plate clutches setup
The clutch takes the engine power, and puts this down through the drive shaft, to the driven wheels on the road but allows you to disengage the engine whilst performing a gear change.
Contact like this requires a lot of grip and a fast response. The more power you have the harder it is for the clutch to operate.
