MENUBentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Under bonnet temperatures are one of the biggest performance killers around.
Quite simply, you want your engine to be sucking in cold air as this carries more oxygen and will allow you to burn more fuel.
The exhaust system is one of the contributors to under bonnet temperatures. You can therefore lag the exhaust to help prevent this heat soak into the engine bay.
High performance engine tuning
Careful selection of your internal engine tuning modifications can lift your engine from a purring kitten into a roaring lion!
While it is tempting to throw in every modification you can, it’s worth noting that not all mods work well together. This is something we cover in our articles as we steer you to the right decision on mods for your car.
Misfires and problems after tuning
When an engine is tuned or mapped you may get misfires flatspots or other problems. We look at the causes of these issues and how to diagnose a fault after remapping.
How to lower the engines compression ratio
Reducing the compression ratio is required if you want to run a high boost supercharged engine. High compression NA (naturally aspirated) engines are quite efficient but when adding forced induction you want to lower the compression ratio.
The compression ratio has a dramatic effect on an engines performance and the problem of knock, (where the air fuel mix prematurely ignites) is controlled to a large degree by the compression ratio.
