Rolls Royce Tuning Tips and Modifications
Maximise your Rolls Royces driving pleasure
Thanks for visiting TorqueCars, we love Rolls Royces and see so many interesting Rolls Royce projects.
If you are looking to build the ultimate Rolls Royce then you came to the right place.
Our tuning tips and articles for the Rolls Royce cover all the best mods and latest tuning methods to help you build a great modified Rolls Royce.
With the help of our forum members, industry professionals and seasoned car modifiers we present a best practice guide to modding your Rolls Royce.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Rolls Royce owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The Benefits of Performance Injectors vs. Stock Parts
Performance injectors “Thanks for reading our fuel injector article.” Your car might be performing just fine with stock parts, but, […]
Boost controllers and remapsBoost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
Remapping the ECU – tunes or remaps benefits and issuesBack in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Clutch tuning: performance clutch modifications and triple plate clutches setupThe clutch takes the engine power, and puts this down through the drive shaft, to the driven wheels on the road but allows you to disengage the engine whilst performing a gear change.
Contact like this requires a lot of grip and a fast response. The more power you have the harder it is for the clutch to operate.