MENUMaserati Tuning Tips and Modifications
Maximise your Maserati’s driving pleasure
Thanks for visiting TorqueCars, we love Maseratis and see so many interesting Maserati projects.
If you are looking to build the ultimate Maserati then you came to the right place.
Our tuning tips and articles for the Maserati cover all the best mods and latest tuning methods to help you build a great modified Maserati.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Maserati.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Maserati owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
One problem with a Turbo is the close proximity of the cold intake charge with the hot exhaust temperatures within the turbo.
Don’t forget that a big air intake heat rise comes from the actual compression of air so even supercharged engine will benefit from an intercooler.
If you have ever felt the nozzle on a tyre pump you will realise that when air is compressed it gains heat.
How to clean a DPF
When your DPF filter blocks up you face large repair bills, follow our tips to ensure your DPF clears. Some simple driving style tips and additive suggestions will make a massive difference to your DPF filter and promote smooth running of your car.
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
