MENURolls Royce Tuning Tips and Modifications
Maximise your Rolls Royces driving pleasure
Thanks for visiting TorqueCars, we love Rolls Royces and see so many interesting Rolls Royce projects.
If you are looking to build the ultimate Rolls Royce then you came to the right place.
Our tuning tips and articles for the Rolls Royce cover all the best mods and latest tuning methods to help you build a great modified Rolls Royce.
With the help of our forum members, industry professionals and seasoned car modifiers we present a best practice guide to modding your Rolls Royce.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Rolls Royce owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Blow off valves and dump valves.
When the throttle is closed (when you lift off the accelerator) in a turbo driven engine there is a build up of pressure as forced air is still coming from the turbo. Lifting off the throttle is a lot like putting a plug in the sink – the flow through is stopped and water would just build up and overflow the sink.
You can increase the power of an engine by increasing its capacity. This is a fairly involved process and requires a good deal of research and preparation. Unless you want to have to retrace your steps and go a different route midway in to the job.
Some of TorqueCars.com members have had their engines rebored ,and this does seem a good way to increase power. However there are a few things we should take into account.
Improve safety and braking of your car
Safety Mods "Play it safe." When one starts modifying a car, little thought is usually given to the safety of the […]
Boost controllers and remaps
Boost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
