MENUMorgan Tuning Tips and Modifications
Maximise your Morgans driving pleasure
Thanks for visiting TorqueCars, we love Morgans and see so many interesting Morgan projects.
If you are looking to build the ultimate Morgan then you came to the right place.
Our tuning tips and articles for the Morgan cover all the best mods and latest tuning methods to help you build a great modified Morgan.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Morgan.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Morgan owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
More power means that more fuel is required so we need to uprate the fuel system and we look at performance mods for your fuelling to avoid running rich or lean.
It is essential to keep the mix of air to fuel exactly right. Power is lost when the engine adjusts itself to stop it running too rich or lean. Many power losses, which manifest themselves as flat spots, at certain points in the rev band can often be traced to a fuelling issue so we will look at performance fuelling upgrades and parts.
Gearbox Remapping
We look at ways to improve gearchanges on your automatic gearbox. Remapping the gearbox will improve shift times, improve acceleration and provide a more lively drive. So OBD port engine tuning/remapping of modern gearboxes is possible and certainly a mod you should consider.
Crankshafts – a complete performance guide
An in depth look at the crankshaft and the performance benefits of flat vs cross plane, cast forged and machined and crankshaft lightening. The crankshaft has a big impact on the performance of the engine and the delivery of power.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
