MENUMorgan Tuning Tips and Modifications
Maximise your Morgans driving pleasure
Thanks for visiting TorqueCars, we love Morgans and see so many interesting Morgan projects.
If you are looking to build the ultimate Morgan then you came to the right place.
Our tuning tips and articles for the Morgan cover all the best mods and latest tuning methods to help you build a great modified Morgan.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Morgan.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Morgan owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
Customizing a car guide
Customizing cars, here you can find out how to customize a car in our simple to follow guide with tips and hints and in depth car customization articles.
Reboring engines
You can increase the power of an engine by increasing its capacity. This is a fairly involved process and requires a good deal of research and preparation. Unless you want to have to retrace your steps and go a different route midway in to the job.
Some of TorqueCars.com members have had their engines rebored ,and this does seem a good way to increase power. However there are a few things we should take into account.
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
