MENUCaterham Tuning Tips and best mods
Maximise your Caterham’s driving pleasure
Thank you so much for visiting TorqueCars, we love Caterham’s and see quite a few interesting projects.
If you are looking to build the ultimate Caterham then you’ve found the right place.
Our tuning tips and articles for the Caterham cover all the best mods and latest tuning methods to help you build a great modified Caterham.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Caterham.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Lightening the flywheel – the flywheel works in a similar way to the wheel in the toy cars you used to rev up and release and let it zoom off. The heavy wheel located between the engine and the gearbox builds up rotational force with speed and momentum.
Effectively storing the energy and helping the car resist changes in engine speed – good for cruising at a steady speed but bad when you need a fast engine response.
Limited slip diffs, which LSD is best for handling.
Slip diffs "Time for something DIFFrent" Every car has a slip diff but with a few tweaks you can totally […]
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
How to lower the engines compression ratio
Reducing the compression ratio is required if you want to run a high boost supercharged engine. High compression NA (naturally aspirated) engines are quite efficient but when adding forced induction you want to lower the compression ratio.
The compression ratio has a dramatic effect on an engines performance and the problem of knock, (where the air fuel mix prematurely ignites) is controlled to a large degree by the compression ratio.
