Maserati Tuning Tips and Modifications
Maximise your Maserati’s driving pleasure
Thanks for visiting TorqueCars, we love Maseratis and see so many interesting Maserati projects.
If you are looking to build the ultimate Maserati then you came to the right place.
Our tuning tips and articles for the Maserati cover all the best mods and latest tuning methods to help you build a great modified Maserati.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Maserati.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Maserati owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Vents – adding performance with Bonnet vents.
Performance gains are possible with the addition of bonnet vents.
Warm air really does kill performance. This is due to the air intake temperatures being hot and air at high temperatures carries less oxygen.
When driving an engine hard the under bonnet temperatures quickly build up and the engine has no choice but to suck this air in reducing your power.
Pistons CrankshaftsWhen an engine is nicely balanced you can raise the redline, and this is where the peak power lies. If you are planning forced induction upgrades then making sure the bottom end of the engine is as strong as possible is a major consideration.
Remapping the ECU – tunes or remaps benefits and issuesBack in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Particulate filters and FAP Performance gains.The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).