MENUFerrari Tuning Tips and Modifications
Looking at ways to improve the perfection in your Ferrari
Thanks for visiting TorqueCars, we love Ferraris and see so many interesting Ferrari projects.
If you are looking to build the ultimate Ferrari then you’ve found the right place.
Our tuning tips and articles for the Ferrari cover all the best mods and latest tuning methods to help you build a great modified Ferrari.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Ferrari.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
DMF vs solid flywheel conversions
We look at the benefits and disadvantages of solid flywheel conversions from a DMF and help you decide which is right for you.
It is our considered opinion that unless a car is used extensively for competition or off road you should stick with a DMF. The additional torque caused by tuning an engine or heavy competition use can quickly destroy a DMF. The solution would be to fit a stronger, higher performance DMF but the aftermarket industry seems geared up to offer solid ones as the upgrade option.
Connecting Rods
We look at the pros and cons of I and H bean conrods, the various materials used from Titanium, Aluminum, and Steel and discuss the best options for your car tuning project.
A performance engine requires optimum designed internal pistons, crankshafts and of course high performing conrods.
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
