MENUDaimler Tuning Tips and Modifications
Maximise your Daimlers driving pleasure
Thank you so much for visiting TorqueCars, we love Daimler’s and see quite a few interesting projects.
If you are looking to build the ultimate Daimler then you’ve found the right place.
Our tuning tips and articles for the Daimler cover all the best mods and latest tuning methods to help you build a great modified Daimler.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Daimler.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Blow off valves and dump valves.
When the throttle is closed (when you lift off the accelerator) in a turbo driven engine there is a build up of pressure as forced air is still coming from the turbo. Lifting off the throttle is a lot like putting a plug in the sink – the flow through is stopped and water would just build up and overflow the sink.
Best project car ideas “So which cars make the best projects?” For a project car, you need lots of potential […]
Converting a FWD to a RWD
We look at converting a front wheel drive car to rear wheel drive. Problems and shortcuts and suggestions for a FWD to RWD conversion project guide. For this reason, most high power cars and motorsport cars have a rear wheel drive setup. Even front engined street cars are converted with a mid mounted engine and rear wheel drive.
Cars are more fun to drive when the power is to the back wheels. It makes for lots of oversteer rather than the safer and more predictable understeer manufacturers build into FWD cars.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
