MENUBentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
We hate to shatter the illusion but they are fairly meaningless terms if applied to power gains and cannot reliably be used to explain how much power a modification adds. There is no consistant difference in part makers between their classifications of stage 1 stage 2 and stage 3 mods.
Some tuning companies will just box their parts in packs labelled stage 1,2 and 3 and maybe even 4 or 5. Such labeling is as helpful as a product number and should not be taken as any sort of guarantee of the power gains or suitability for your car.
Low ratio sport gearbox setup and selection.
Gearbox – Lower ratios give better acceleration times and lower fuel economy. Six or seven speed boxes are better matched to modern engines.
Most street applications are closer 1st and 2nd gear ratios for that off the line 0-60 boost or for the fast exec a lower 2nd and 3rd ratio give improved overtaking flexibility and 30 – 70 mph acceleration with a high 4th and 5th gear to give motorway fuel economy.
Stage 2 Tune
We look at the best mods to take your car tuning project to stage 2, and discuss the best mods for stage two upgrades. With most people asking about mods to make the most power we thought we would look at what it takes to fully release your cars potential and dissect the pros and cons of stage 2 mods.
Boost controllers and remaps
Boost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
