Triumph Tuning Tips and Modifications
Maximise your Triumphs driving pleasure
Thanks for visiting TorqueCars, we love Triumphs and see so many interesting Triumph projects.
If you are looking to build the ultimate Triumph then you came to the right place.
Our tuning tips and articles for the Triumph cover all the best mods and latest tuning methods to help you build a great modified Triumph.
With the help of our forum members, industry professionals and seasoned car modifiers we present a best practice guide to modding your Triumph.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Triumph owners.
Feel free to drop a tip or suggestion in the comments box at the bottom of every article, this feedback is greatly valued and helps us refine our articles.
Electric water pumps
In a performance engine you should never underestimate the need for adequate cooling.
All water cooled cars work on the principle of water being pumped around the engine and then to a radiator where it releases the heat.
Most water pumps are mechanical and run off the crank.
Remapping the ECU – tunes or remaps benefits and issuesBack in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Ceramic exhaust coatings and exhaust wrapUnder bonnet temperatures are one of the biggest performance killers around.
Quite simply, you want your engine to be sucking in cold air as this carries more oxygen and will allow you to burn more fuel.
The exhaust system is one of the contributors to under bonnet temperatures. You can therefore lag the exhaust to help prevent this heat soak into the engine bay.
Strengthening enginesWe look at pistons, conrods and cranks and explain the methods used to design and build these and the impact they have on strengthening your engine.