MENURolls Royce Tuning Tips and Modifications
Maximise your Rolls Royces driving pleasure
Thanks for visiting TorqueCars, we love Rolls Royces and see so many interesting Rolls Royce projects.
If you are looking to build the ultimate Rolls Royce then you came to the right place.
Our tuning tips and articles for the Rolls Royce cover all the best mods and latest tuning methods to help you build a great modified Rolls Royce.
With the help of our forum members, industry professionals and seasoned car modifiers we present a best practice guide to modding your Rolls Royce.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Rolls Royce owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The inlet and outlet ports on the engine block are usually larger than those of the manifolds that connect to them.
This allows for scope in the manufacturing process to allow for mismatched alignment.
Generally the engine ports are larger in the upstream flow direction avoiding turbulance but power gains can be made by matching these up.
Boost controllers and remaps
Boost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
Gearbox Remapping
We look at ways to improve gearchanges on your automatic gearbox. Remapping the gearbox will improve shift times, improve acceleration and provide a more lively drive. So OBD port engine tuning/remapping of modern gearboxes is possible and certainly a mod you should consider.
Anti lag systems
We look at Anti lag systems in cars and how these keep the turbo spinning ready to provide boost from low RPM speeds. When you lift off the throttle the engine power cuts and the turbo starts to spool down.
From this low spool state there is a delay while the turbo spins up again before it can provide any useful boost. We discuss the advantages and disadvantages of ALS and look at alternative options.
