Maserati Tuning Tips and Modifications
Maximise your Maserati’s driving pleasure
Thanks for visiting TorqueCars, we love Maseratis and see so many interesting Maserati projects.
If you are looking to build the ultimate Maserati then you came to the right place.
Our tuning tips and articles for the Maserati cover all the best mods and latest tuning methods to help you build a great modified Maserati.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Maserati.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Maserati owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
What is brake fade and what causes brake fade?
This phenomenon known as brake fade can be quite unexpected and lethal and I would hazard a guess that 1 in 4 cars are likely to experience brake fade to some degree. Brake fade manifests itself by a spongy feel on the pedal and little or no braking force. Do not confuse brake fade with bad brakes or a mechanical fault as it applies to brake systems in relatively good condition.
Principles of porting an engine and big valve conversionsThe inlet and outlet ports on the engine block are usually larger than those of the manifolds that connect to them.
This allows for scope in the manufacturing process to allow for mismatched alignment.
Generally the engine ports are larger in the upstream flow direction avoiding turbulance but power gains can be made by matching these up.
Blow off valves, dump valves and screamer pipesBlow off valves and dump valves.
When the throttle is closed (when you lift off the accelerator) in a turbo driven engine there is a build up of pressure as forced air is still coming from the turbo. Lifting off the throttle is a lot like putting a plug in the sink – the flow through is stopped and water would just build up and overflow the sink.
When an engine is nicely balanced you can raise the redline, and this is where the peak power lies. If you are planning forced induction upgrades then making sure the bottom end of the engine is as strong as possible is a major consideration.