MENUBristol Tuning Tips and Modifications
Maximise your Bristols driving pleasure
Thank you so much for visiting TorqueCars, we love Bristol’s and see quite a few interesting projects.
If you are looking to build the ultimate Bristol then you’ve found the right place.
Our tuning tips and articles for the Bristol cover all the best mods and latest tuning methods to help you build a great modified Bristol.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bristol.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The inlet and outlet ports on the engine block are usually larger than those of the manifolds that connect to them.
This allows for scope in the manufacturing process to allow for mismatched alignment.
Generally the engine ports are larger in the upstream flow direction avoiding turbulance but power gains can be made by matching these up.
Fuel and fuel additives octane and pressure boost valves.
Choice of fuel becomes more critical in a high compression or turbo engine. “One of my Pet(rol) hates!” Fuel: this […]
Chip Tuning – better engine management.
The days of fiddling around in the engine bay with a spanner to make the car go faster are numbered.
Modern engine computers (ECU’s) take over many of the controls of all aspects of engine management from timing to fuelling and more.
This actually means you get better power, a cleaner burn and more reliable engine but it does not mean the end of tuning.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
