MENUFerrari Tuning Tips and Modifications
Looking at ways to improve the perfection in your Ferrari
Thanks for visiting TorqueCars, we love Ferraris and see so many interesting Ferrari projects.
If you are looking to build the ultimate Ferrari then you’ve found the right place.
Our tuning tips and articles for the Ferrari cover all the best mods and latest tuning methods to help you build a great modified Ferrari.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Ferrari.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The inlet and outlet ports on the engine block are usually larger than those of the manifolds that connect to them.
This allows for scope in the manufacturing process to allow for mismatched alignment.
Generally the engine ports are larger in the upstream flow direction avoiding turbulance but power gains can be made by matching these up.
Decats & Sports catalysts
Catalysts are a vital component in our modern tree hugging environmentally conscious society. First TorqueCars will look at what a catalyst does and how it works.
A catalyst is actually a term used to explain anything which accelerates or performs a chemical reaction. In a car the exhaust fumes are fed through a matrix of ceramic honeycomb lined with precious metals.
Particulate filters and FAP Performance gains.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
