MENUBristol Tuning Tips and Modifications
Maximise your Bristols driving pleasure
Thank you so much for visiting TorqueCars, we love Bristol’s and see quite a few interesting projects.
If you are looking to build the ultimate Bristol then you’ve found the right place.
Our tuning tips and articles for the Bristol cover all the best mods and latest tuning methods to help you build a great modified Bristol.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bristol.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The inlet and outlet ports on the engine block are usually larger than those of the manifolds that connect to them.
This allows for scope in the manufacturing process to allow for mismatched alignment.
Generally the engine ports are larger in the upstream flow direction avoiding turbulance but power gains can be made by matching these up.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
Anti lag systems
We look at Anti lag systems in cars and how these keep the turbo spinning ready to provide boost from low RPM speeds. When you lift off the throttle the engine power cuts and the turbo starts to spool down.
From this low spool state there is a delay while the turbo spins up again before it can provide any useful boost. We discuss the advantages and disadvantages of ALS and look at alternative options.
Dry sumps
Guide to Dry sump engine conversions we look at the advantages and disadvantages and discuss why you would want to convert to a dry sump. A conventional sump is a reservoir at the bottom of the engine from where oil is pumped around the engine. The dry sump relocated this reservoir and offers more efficient lubrication.
