Bristol Tuning Tips and Modifications
Maximise your Bristols driving pleasure
Thank you so much for visiting TorqueCars, we love Bristol’s and see quite a few interesting projects.
If you are looking to build the ultimate Bristol then you’ve found the right place.
Our tuning tips and articles for the Bristol cover all the best mods and latest tuning methods to help you build a great modified Bristol.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bristol.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Low ratio sport gearbox setup and selection.
Gearbox – Lower ratios give better acceleration times and lower fuel economy. Six or seven speed boxes are better matched to modern engines.
Most street applications are closer 1st and 2nd gear ratios for that off the line 0-60 boost or for the fast exec a lower 2nd and 3rd ratio give improved overtaking flexibility and 30 – 70 mph acceleration with a high 4th and 5th gear to give motorway fuel economy.
Roll cages & Roll bars custom fitting kitsMany tracks insist that cars are fitted with roll cages and or roll bars. In motor sport competitions you will see that most regulations also insist on a roll-cage. What is the job of a roll cage and are there any advantages to having one fitted? More and more Torquecars members cars are being fitted with roll cages, so is this just a new styling trend or is there something beneficial to the car tuner?
Roll cages offer protection to the driver and tighter body control.
Lightening the flywheelLightening the flywheel – the flywheel works in a similar way to the wheel in the toy cars you used to rev up and release and let it zoom off. The heavy wheel located between the engine and the gearbox builds up rotational force with speed and momentum.
Effectively storing the energy and helping the car resist changes in engine speed – good for cruising at a steady speed but bad when you need a fast engine response.
Boost controllers and remapsBoost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.