MENUDatsun Tuning Tips and Modifications
Maximise your Datsuns driving pleasure
Thank you so much for visiting TorqueCars, we love Datsun’s and see quite a few interesting projects.
If you are looking to build the ultimate Datsun then you’ve found the right place.
Our tuning tips and articles for the Datsun cover all the best mods and latest tuning methods to help you build a great modified Datsun.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Datsun.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
You’ve finished tuning up your engine but you find that at full throttle the engine splutters or stalls. When you get the car on a diagnostic you find that the knock sensor is kicking in to protect the engine.
Engine knock is a condition where the fuel inside the engine ignites prematurely and occurs within an engine running at high compression. (It can also be caused by other factors including low octane/poor quality fuel or hot spots within the engine.)
Clutch tuning: performance clutch modifications and triple plate clutches setup
The clutch takes the engine power, and puts this down through the drive shaft, to the driven wheels on the road but allows you to disengage the engine whilst performing a gear change.
Contact like this requires a lot of grip and a fast response. The more power you have the harder it is for the clutch to operate.
Fitting Strut Braces and how to install a strut brace
Fitting a strut brace and performance benefits "Strut your funky stuff" Think of a car like a shoebox with no […]
Boost controllers and remaps
Boost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
