MENUBentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
When an engine is tuned or mapped you may get misfires flatspots or other problems. We look at the causes of these issues and how to diagnose a fault after remapping.
DMF vs solid flywheel conversions
We look at the benefits and disadvantages of solid flywheel conversions from a DMF and help you decide which is right for you.
It is our considered opinion that unless a car is used extensively for competition or off road you should stick with a DMF. The additional torque caused by tuning an engine or heavy competition use can quickly destroy a DMF. The solution would be to fit a stronger, higher performance DMF but the aftermarket industry seems geared up to offer solid ones as the upgrade option.
Adding a supercharger
We look at adding a supercharger to a NASP (naturally aspirated) engine and focus on the main problem areas and considerations encountered in a tuning project of this scope.
There are lots of pitfalls and this is not a “bolt in on and hope it works” modification as many other things need to be done to make this work safely and reliably.
Ceramic exhaust coatings and exhaust wrap
Under bonnet temperatures are one of the biggest performance killers around.
Quite simply, you want your engine to be sucking in cold air as this carries more oxygen and will allow you to burn more fuel.
The exhaust system is one of the contributors to under bonnet temperatures. You can therefore lag the exhaust to help prevent this heat soak into the engine bay.
