Noble Tuning Tips and Modifications
Maximise your Nobles driving pleasure
Thanks for visiting TorqueCars, we love Nobles and see so many interesting Noble projects.
If you are looking to build the ultimate Noble then you came to the right place.
Our tuning tips and articles for the Noble cover all the best mods and latest tuning methods to help you build a great modified Noble.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Noble.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Noble owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Particulate filters and FAP Performance gains.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
Crankshafts – a complete performance guideAn in depth look at the crankshaft and the performance benefits of flat vs cross plane, cast forged and machined and crankshaft lightening. The crankshaft has a big impact on the performance of the engine and the delivery of power.
Induction Kits vs Panel FiltersExplore the differences and benefits of an induction kit compared to panel air filters in real world aplications. Do intake mods help you make more power? Is it worth the cost?
Comparison of Turbo’s and superchargersBoth work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?