MENUMorgan Tuning Tips and Modifications
Maximise your Morgans driving pleasure
Thanks for visiting TorqueCars, we love Morgans and see so many interesting Morgan projects.
If you are looking to build the ultimate Morgan then you came to the right place.
Our tuning tips and articles for the Morgan cover all the best mods and latest tuning methods to help you build a great modified Morgan.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Morgan.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Morgan owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
We look at tuning cars, and taking the car to stage 1, where most people start. We blow open many common myths around common stage 1 mods, and help you decide which are the best mods for your car and upgrade options.
Reboring engines
You can increase the power of an engine by increasing its capacity. This is a fairly involved process and requires a good deal of research and preparation. Unless you want to have to retrace your steps and go a different route midway in to the job.
Some of TorqueCars.com members have had their engines rebored ,and this does seem a good way to increase power. However there are a few things we should take into account.
Spoiler aerodymics rear spoiler design and construction
We look at how spoilers work? We also explain the difference between a spoiler and a wing. Spoilers are generally closer to the body of the car and help diffuse the air.
Wings are mounted much higher up and have an aerodynamic effect of creating downforce
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
