MENUMorgan Tuning Tips and Modifications
Maximise your Morgans driving pleasure
Thanks for visiting TorqueCars, we love Morgans and see so many interesting Morgan projects.
If you are looking to build the ultimate Morgan then you came to the right place.
Our tuning tips and articles for the Morgan cover all the best mods and latest tuning methods to help you build a great modified Morgan.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Morgan.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Morgan owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Maximise your performance gains with strict weight reduction. "Weight reduction. Putting your car on a diet.." Lighter cars are quicker […]
A guide to supercharger kits: benefits vs disadvantages
Superchargers offer the promise of substantial power gains with very few drawbacks. So lets look at the growing popularity of supercharger kits and see what its all about.
A supercharger is quite simply an air compressor which helps push more air into an engine. These are driven by a belt from the engine effectively creating pull on the engine sapping up to 30% of the engines power.
Remapping the ECU – tunes or remaps benefits and issues
Back in the good old days – the task of timing the ignition spark was performed by the distributor. The greater the RPM, the more the timing would advance.
This did a reasonable job but for the most effective power you would need to vary the timing to a greater degree than a fixed ratio advance curve. The electronic ignition system was borne.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
