MENUBentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
You’ve finished tuning up your engine but you find that at full throttle the engine splutters or stalls. When you get the car on a diagnostic you find that the knock sensor is kicking in to protect the engine.
Engine knock is a condition where the fuel inside the engine ignites prematurely and occurs within an engine running at high compression. (It can also be caused by other factors including low octane/poor quality fuel or hot spots within the engine.)
Fitting Strut Braces and how to install a strut brace
Fitting a strut brace and performance benefits "Strut your funky stuff" Think of a car like a shoebox with no […]
Throttle bodies
It is time to blow open the world of throttle bodies, see what they are, how they work, and what effect they have on performance. Typically the most common modifications are around the exhaust systems and induction kits, however, you should also consider the addition of high performing throttle body to your vehicle.
In this article, we’ll cover all that you need to know about throttle bodies, throttle body conversion, benefits, problems, and replacement costs.
How to lower the engines compression ratio
Reducing the compression ratio is required if you want to run a high boost supercharged engine. High compression NA (naturally aspirated) engines are quite efficient but when adding forced induction you want to lower the compression ratio.
The compression ratio has a dramatic effect on an engines performance and the problem of knock, (where the air fuel mix prematurely ignites) is controlled to a large degree by the compression ratio.
