MENUMorgan Tuning Tips and Modifications
Maximise your Morgans driving pleasure
Thanks for visiting TorqueCars, we love Morgans and see so many interesting Morgan projects.
If you are looking to build the ultimate Morgan then you came to the right place.
Our tuning tips and articles for the Morgan cover all the best mods and latest tuning methods to help you build a great modified Morgan.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Morgan.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics for Morgan owners.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
More power means that more fuel is required so we need to uprate the fuel system and we look at performance mods for your fuelling to avoid running rich or lean.
It is essential to keep the mix of air to fuel exactly right. Power is lost when the engine adjusts itself to stop it running too rich or lean. Many power losses, which manifest themselves as flat spots, at certain points in the rev band can often be traced to a fuelling issue so we will look at performance fuelling upgrades and parts.
Stage 3 tune
Track day tuning and motorsport preparation, find out all you need to know about taking your car to the track in our stage 3 car tuning article. All you need to know about stage 3 modification and tuning options.
Adding a supercharger
We look at adding a supercharger to a NASP (naturally aspirated) engine and focus on the main problem areas and considerations encountered in a tuning project of this scope.
There are lots of pitfalls and this is not a “bolt in on and hope it works” modification as many other things need to be done to make this work safely and reliably.
Particulate filters and FAP Performance gains.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
