MENUBentley Tuning Tips and Modifications
Maximise your Bentleys driving pleasure
Thank you so much for visiting TorqueCars, we love Bentley’s and see quite a few interesting projects.
If you are looking to build the ultimate Bentley then you’ve found the right place.
Our tuning tips and articles for the Bentley cover all the best mods and latest tuning methods to help you build a great modified Bentley.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bentley.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Reducing the compression ratio is required if you want to run a high boost supercharged engine. High compression NA (naturally aspirated) engines are quite efficient but when adding forced induction you want to lower the compression ratio.
The compression ratio has a dramatic effect on an engines performance and the problem of knock, (where the air fuel mix prematurely ignites) is controlled to a large degree by the compression ratio.
How to add a turbo to a non turbo car.
Adding a turbo or supercharger is a fairly complex modification so we’ll cover the basics of adding a turbo upgrade in this article. The idea of doubling your power with one “simple turbo upgrade” is certainly appealing, but what is involved in a turbo conversion project? What are the common problems when a car is turbocharged? How do you add a turbo safely to a car?
Wastegate and Blow off valves
We look at wastegates vs Bovs and explain the differences between them. Find out where the wastegate and bov goes and what they do in our informative article. We find that many people are confused by the two devices and see the terms wrongly used.
Reboring engines
You can increase the power of an engine by increasing its capacity. This is a fairly involved process and requires a good deal of research and preparation. Unless you want to have to retrace your steps and go a different route midway in to the job.
Some of TorqueCars.com members have had their engines rebored ,and this does seem a good way to increase power. However there are a few things we should take into account.
Todays featured car modification articles
Fuel Octane Ratings
Fuel octane ratings RON, MON, AKI RdON and PON explanation and compared. More...
