MENUDaimler Tuning Tips and Modifications
Maximise your Daimlers driving pleasure
Thank you so much for visiting TorqueCars, we love Daimler’s and see quite a few interesting projects.
If you are looking to build the ultimate Daimler then you’ve found the right place.
Our tuning tips and articles for the Daimler cover all the best mods and latest tuning methods to help you build a great modified Daimler.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Daimler.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
Turbos Explained
Let’s look at some questions that we’ve had about turbos “what is a turbo” “why were turbos invented” and “how do they work “, “what are blow-off valves”, “what’s a wastegate actuator do” and “what are twin scroll turbos & what’s the difference between them and standard turbos”?
Stretched tires legal & safe?
What are stretched tires and are they safe? A question we get asked over and over again but there are 2 schools of thought on this subject and we aim to cover the pros and cons in as open and unbiased way as we can.
This is a tyre which has been fitted to a much wider rim than it was originally intended or designed to fit. Stretches vary from an inch to around 3 inches. It has gained a lot of popularity in VW circles and the look is really starting to take off.
Particulate filters and FAP Performance gains.
The particulate filter is a stand alone unit. It is located upstream of the cat in the exhaust system and its purpose is to remove soot particles from the gas stream. The cat the proceeds to do its usual job of converting CO to CO2 and is in no way dependent or relied upon by the particulate filter.
In diesels the cats are two way devices and run in unregulated mode (ie. no O2 sensor like a petrol car).
