MENUCaterham Tuning Tips and best mods
Maximise your Caterham’s driving pleasure
Thank you so much for visiting TorqueCars, we love Caterham’s and see quite a few interesting projects.
If you are looking to build the ultimate Caterham then you’ve found the right place.
Our tuning tips and articles for the Caterham cover all the best mods and latest tuning methods to help you build a great modified Caterham.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Caterham.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
Best project car ideas “So which cars make the best projects?” For a project car, you need lots of potential […]
Anti lag systems
We look at Anti lag systems in cars and how these keep the turbo spinning ready to provide boost from low RPM speeds. When you lift off the throttle the engine power cuts and the turbo starts to spool down.
From this low spool state there is a delay while the turbo spins up again before it can provide any useful boost. We discuss the advantages and disadvantages of ALS and look at alternative options.
DMF vs solid flywheel conversions
We look at the benefits and disadvantages of solid flywheel conversions from a DMF and help you decide which is right for you.
It is our considered opinion that unless a car is used extensively for competition or off road you should stick with a DMF. The additional torque caused by tuning an engine or heavy competition use can quickly destroy a DMF. The solution would be to fit a stronger, higher performance DMF but the aftermarket industry seems geared up to offer solid ones as the upgrade option.
Boost controllers and remaps
Boost controllers
The turbo is driven by the exhaust gases and the faster the exhaust flows the quicker the turbo spins and more air gets forced in to the engine.
If too much air is forced into the engine then it will run lean. This causes an intermittent loss of power and you also risk putting too much pressure on the engine with a surge of power.
