MENUBristol Tuning Tips and Modifications
Maximise your Bristols driving pleasure
Thank you so much for visiting TorqueCars, we love Bristol’s and see quite a few interesting projects.
If you are looking to build the ultimate Bristol then you’ve found the right place.
Our tuning tips and articles for the Bristol cover all the best mods and latest tuning methods to help you build a great modified Bristol.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Bristol.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The clutch takes the engine power, and puts this down through the drive shaft, to the driven wheels on the road but allows you to disengage the engine whilst performing a gear change.
Contact like this requires a lot of grip and a fast response. The more power you have the harder it is for the clutch to operate.
How to lower the engines compression ratio
Reducing the compression ratio is required if you want to run a high boost supercharged engine. High compression NA (naturally aspirated) engines are quite efficient but when adding forced induction you want to lower the compression ratio.
The compression ratio has a dramatic effect on an engines performance and the problem of knock, (where the air fuel mix prematurely ignites) is controlled to a large degree by the compression ratio.
Wastegate and Blow off valves
We look at wastegates vs Bovs and explain the differences between them. Find out where the wastegate and bov goes and what they do in our informative article. We find that many people are confused by the two devices and see the terms wrongly used.
Adding a supercharger
We look at adding a supercharger to a NASP (naturally aspirated) engine and focus on the main problem areas and considerations encountered in a tuning project of this scope.
There are lots of pitfalls and this is not a “bolt in on and hope it works” modification as many other things need to be done to make this work safely and reliably.
