MENUCaterham Tuning Tips and best mods
Maximise your Caterham’s driving pleasure
Thank you so much for visiting TorqueCars, we love Caterham’s and see quite a few interesting projects.
If you are looking to build the ultimate Caterham then you’ve found the right place.
Our tuning tips and articles for the Caterham cover all the best mods and latest tuning methods to help you build a great modified Caterham.
With the help of our forum members, industry professionals and seasoned car modders we present a best practice guide to modding your Caterham.
Please join us in our forums, we love to hear what members are up to and it helps us spot trends so that we can ensure the site is always covering the latest and greatest tuning topics.
Feel free to drop a tip or suggestion on the comments box at the bottom of each and every article, this feedback is greatly valued and helps us refine our articles.
The valves are like the doorways into the engine and control the flow of the intake air and fuel and then after combustion they control the exit of the exhaust gases.
As you can guess the valve springs work incredibly hard, and as you increase the power of your engine the valve choice is vital.
TorqueCars will now take a look at the many considerations taken into account when selecting valve springs.
Dry sumps
Guide to Dry sump engine conversions we look at the advantages and disadvantages and discuss why you would want to convert to a dry sump. A conventional sump is a reservoir at the bottom of the engine from where oil is pumped around the engine. The dry sump relocated this reservoir and offers more efficient lubrication.
Vernier pulleys
TorqueCars give advice and tips on using vernier pulleys setting them up and how changes to the pulley can alter the power band. With a vernier pulley you have the ability to control the advance or retard on your cam timing and move the power band around.
Comparison of Turbo’s and superchargers
Both work on the same principle they blow air into the engine under pressure. Both have a turbine which spins up depending on the engine speed and the higher the revs the greater the volume of air is forced into the engine. But there are some major differences between the two and which is best for your project?
