A little help please

[herb]

Just wandering if someone could go on the rosstec site and tell me what these fault codes are please 16684, 16686
I can't read them properly on my phone

 

[T9 man]

Cut and pasted from their website.

16684/P0300/000768 - Random/Multiple Cylinder Misfire Detected
Possible Causes
Air Intake System leaking
Fuel Supply faulty
Injector(s) faulty
Ignition Cable(s) and/or Spark Plug(s) faulty
Ignition Coil(s) faulty
Exhaust Gas Recirculation (EGR) Valve (N18) stuck/open
Camshaft Position Sensor (G40) faulty
Possible Solutions
Check Misfire Recognition
Check Air Intake System
Check Fuel Supply
Check Injector(s) and Injector Sealing
Check Ignition Cable(s) and Spark Plug(s)
Check Ignition Coil(s)
Check Exhaust Gas Recirculation (EGR) Valve (N18)
Check Camshaft Position Sensor (G40)
-------------------------------------------------------------
16686/P0302/000770 - Cylinder 2 Misfire Detected
Possible Causes
Ignition system
Fuel injectors
Fuel pressure
Running out of fuel
EVAP canister purge valve
Evaporative emission system
Low compression
Base engine problems
Controle Module damaged
Special Notes
This feature search for engine misfire in a specific cylinder. Most of the time the cause for a misfire is a lack of combustion in a cylinder due to absence of spark, poor fuel metering, or poor compression.

 

[HDi fun]

That's very concise

 

[herb]

Cut and pasted from their website.

16684/P0300/000768 - Random/Multiple Cylinder Misfire Detected
Possible Causes
Air Intake System leaking
Fuel Supply faulty
Injector(s) faulty
Ignition Cable(s) and/or Spark Plug(s) faulty
Ignition Coil(s) faulty
Exhaust Gas Recirculation (EGR) Valve (N18) stuck/open
Camshaft Position Sensor (G40) faulty
Possible Solutions
Check Misfire Recognition
Check Air Intake System
Check Fuel Supply
Check Injector(s) and Injector Sealing
Check Ignition Cable(s) and Spark Plug(s)
Check Ignition Coil(s)
Check Exhaust Gas Recirculation (EGR) Valve (N18)
Check Camshaft Position Sensor (G40)
-------------------------------------------------------------
16686/P0302/000770 - Cylinder 2 Misfire Detected
Possible Causes
Ignition system
Fuel injectors
Fuel pressure
Running out of fuel
EVAP canister purge valve
Evaporative emission system
Low compression
Base engine problems
Controle Module damaged
Special Notes
This feature search for engine misfire in a specific cylinder. Most of the time the cause for a misfire is a lack of combustion in a cylinder due to absence of spark, poor fuel metering, or poor compression.

Thanks for this t9

 

[T9 man]

Your welcome

 

[HDi fun]

Herb's gonna have a busy weekend then!

 

[pgarner]

That's very concise

joys of rosstechs they build the software and it shows a brief description of the fault. then the website shows lots

 

[herb]

Herb's gonna have a busy weekend then!

Nope its sorted a coilpack had gone and has been replaced

 

[HDi fun]

Nope its sorted a coilpack had gone and has been replaced

That's a bit of luck then.

 

[pgarner]

Nope its sorted a coilpack had gone and has been replaced

watch the rest carefully mate if your getting a multiple missfire code