Search results

Hi guys, i have a small question to ask. Ive recently had new brakes fitted to my car; Brembo 4 pots and im lookin at buyin some new brake pads as the ones i have at the moment squeal a fair bit. The problem i have is i dont know what size pads i need? Or if i need a specific size? Does anyone...

haha fair play. i was obviously searching the wrong thing. Thanks for that ;)

Ye, i mean the car comes standard with some smaller black ones fitted. Only id like to replace some of them with blue or red piping. but im stuck on where to look for them. tried ebay, and i could only find black ones :(

ok all i know is they are pvc plastic. there not serving any purpose other than makin the engine bay look a little tidier. if they are heat resistant i didnt know that.

Im not sure. There plastic so i presume not. They dont need to be.

Hi. Ive been lookin at getting some plastic corrugated conduit piping to cover the pipes and cables in my engine bay, only i cannot find anywhere or anyone that sells any. Ive tried places like City Electical Factors, Bennets, Links, B&Q, Charlies, Wickes but no luck. This is the kinda thing...

Thx! Well unfortunately i had an accident driving my peugeot about 7 months back and it ended up being written off. Has to be said, was the worst thing that has ever happened to me. Luckily i wasnt injured, neither was the other car driver. Unfortunately i had to shoulder the blame even after...

Hi folks! Long time since ive visited torquecars forum! Hi again lol. Just had a question over hks forced induction. I realised hks do not make an induction kit for peugeot, thought would it be worth while or even possible to install a kit from hks into a 306? If so does anyone have any ideas...

nice one guys but im still unsure as to if the throttle flutes are for direct air induction?? im guessing they are.

Cool thanks guys. I think ur on about the same situation as me pgarner with the throttle bodies replacing the inlet manifold. The link shows the type of throttle bodies i meant to talk about http://y0z2asport.com/prodimages/ys_jenvey_throttle_bodies_m_003.JPG

Hi, i recently read through Octobers issue of Fast Car and came accross the modified Fiesta with engine transplant and Jenvey throttle bodies. I was wondering if anybody could offer some information and input into the difference between a Jenvey throttle body instalation in comparison to an...

hahaha :)

Wierd tho. It could be a badly laid out picture but the pedals seem to fit one another the way they are displayed. If you move the accel pedal to the far right, and the clutch to the left, the red in the pedals aint gunna match as well as they do now. Was just looking for pedals n checked...

I knoticed a pedal set (Ripspeed GT Pedal Set) the other day, only i knoticed what seemed to be the accelerator pedal (the larger of the three) shown on the left hand side, not the right. Does anyone know why this is? They are a universal fit. Thanks

Ok thanks. My brother found a topic over google with recommended psi pressures for 205/40R17 size tyres of 32 - 36 psi. Il give my tyres a check tomorrow and set their pressures properly. Thanks for the help ;)

Re: "Default" PSI level for tyres Ok thanks. My brother found a topic over google with recommended psi pressures for 205/40R17 size tyres of 32 - 36 psi. Il give my tyres a check tomorrow and set their pressures properly. Thanks for the help ;)

Its a Peugeot 306 Meridian

Re: "Default" PSI level for tyres Its a Peugeot 306 Meridian

Is there anywhere that will detail me on the psi level for the air in car tyres as i dont have any info on me that does. I have two Kingstar RADIAL K106's (size: 205/40R17 84W) on the rear and two DiamondBack TR968's (size: 205/40R17 84V) but im not sure of the standard psi level these tyres are...

Is there anywhere that will detail me on the psi level for the air in car tyres as i dont have any info on me that does. I have two Kingstar RADIAL K106's (size: 205/40R17 84W) on the rear and two DiamondBack TR968's (size: 205/40R17 84V) but im not sure of the standard psi level these tyres are...

If you say "under cars neaons are completly illeagle" then say that "if the glow is seen not the bulb and theres no flashing or strobing then ok" it doesnt make sense. Thats basically what i just said ;) I've been informed from reliable police source that under car neon lights are not illegal...

Neon undercar kits are not illegal, so long as they follow a couple rules. They must not flash, rotate etc. Any direct light source (i.e. the bulbs or tubes) must not be seen, only the glow can be visable Only white lights on the front of the car Only red lights on the rear of the car Only...

There is no written law prohibiting the installation and use of under car neon lights, so long as they follow the few simple rules i mentioned earlier. Breaking these however, makes using the neons illegal. They can be flashing or whatever when your not in motion off the road; but whilst on the...

Undercar neon lights are not illegal. Many people do not quite understand the rules but i have found out from a mates dad who happens to be in the police force. Neon undercar kits are not illegal, so long as they follow a couple rules. They must not flash, rotate etc. Any direct light source...

Hehe :) Ye the side neons need moving more towards the outer edge of the chassis a little, give it a better glow, and the back one is off to one side due to the exhaust, but it still looks great at night.

Here are some pictures of my pug with the neons on ;) Hope you like

Ye i agree. Is that another bespoke job? Im kinda new to all this car modifying business so knowing how and where to get these things done is something im gunna have to find out and learn hehe

Ye i totally agree with you both. The new interior would just transform the cars appearance completely and give it a much bigger "wow" when you open the doors. Any incar lighting would also stand out much clearer with new light coloured interior. Il get some picture of the neons over the next...

Hey guys. Hmm, well im lookin at interior styling options atm really; like the dashboard, centre console, seats, door panels. Just smarten the car up a bit, give it a personality i guess. I love my lighting also. Have been looking at neon glo-tube web pages that do all kind of lighting styles...

Not given that much thought yet really. I keep coming up with small ideas but i think for the time being im gunna try n stick to interior styling to get the dash/seats/console looking as smart as the outside. Once that is done, i can then look to the smaller less expensive styling that will...

Hey guys! Just a quick post to say hello. Stumbled across TorqueCars the other night by chance and so far i like what i have seen and read. Seems a pretty sound place to get to know some people and ask any questions. :) Just recently bought my first car just over two weeks ago: a Peugeot 306...

hey, thanks for the welcome waynne! ye, atm im just lookin at the options available for dashboard styling etc then il consider the cost once i know more. im based in shrewsbury atm. if you do know of any in reasonable proximity to myself, if you could let me know, that would be top. thanks again :)

Hey, i recently bought a 306 meridian with skirts and splitters, neons and induction kit, and am looking towards upgrading the dashboard along with the dials and centre console. Does anyone know where to get them from and how to go about fitting them? thanks