nothin much has been done to the a3, have fitted a new bmc panel filter and modified the cold air feed so it is now a direct feed instead of through all them awkward pipes. getting some 18in s line alloys, fitted new caliper carriers and fitted the 3.2 v6 discs. want to get a full milltek system but for some reason they didnt make one for my modal nor did most other manufactures it is the 2.0fsi which was only out for around a year during 2003-2005 and from then it has always been the 2.0tfsi so not many things have been made for my modal, n the is including all the decent force fed induction kits like the viper, i was also looking at the carbonio air filters but yet again, they didnt do it for my modal. going to get it remapped but for £300 and only a increase of around 10-15 bhp really deciding weather it is worth it or not! if i had the money then i would bore it out slightly, fit new thinner pistons to get a better cubic capacity and then replace the cams with performance cams, get a decent fuel pressure regulator to give a better burn. and loads of other little things, but its a lot of money for little gains. not goin to bother about it now about fitted a new engine or turbo, just leave it a few years till i get an s3