After 4 years and X-amount of dosh spent, my pride and joy is finally finished. Again. Sort of.
List of Modifications Completed;
Engine/Drivetrain:
M50 Manifold
Tubular Headers
540i 3.5" MAF
M50 Mid Section/328i Backbox
328i Pink Injectors
ECU Remap, Custom Map to Suit Specific Engine Alterations
ACS Throttle Body Delete
Throttle Body Heater Delete
CCV (Crank Case Ventilation) Delete, Crankcase Breather, Manifold Plugged, Dipstick Vent Plugged
Eaton M45 Supercharger (to be replaced with M62 at later date) ,Intercooler, Custom Piping, Diverter ValveOV Hybrid (May change)
Direnza 50mm Aluminium Radiator w/ 14" Switch Operated Puller Fan
Suspension/Wheels:
Stance+ Fully Adjustable Coilovers, With Standard e36 Top Mounts
Custom X-Brace w/ Skid Plate
M3 Reinforced Suspension Top Mount Plates
Sway Bars, Front and Rear
Vented and Drilled Discs
Sport Brake Pads
Braided Brake Lines
17" E39 M Sport Alloys, 17x8 Front, 17x9 Rear
225x45x17 (Front), 245x40x17 (Rear)
Body:
25mm Widebody Fibreglass Quarter-Panels
M3 Front Bumper
Reiger GT Lip
328i Rear Diffuser
E36 GT Rear Spoiler
Rear Window Spoiler
Carbon Fibre Wrapped Bonnet
Interior:
OMP Deep Dish Steering Wheel
Sabelt RacerDuo Bucket Seat on FIA Approved Fixed Seat Rails
Boost Gauge attached to A Pillar
Radio Delete
Pics Attached
Thanks again to everyone who has looked/liked/commented on the various posts I have made over the course of this project. The support over the course has been incredible.
Cheers
List of Modifications Completed;
Engine/Drivetrain:
M50 Manifold
Tubular Headers
540i 3.5" MAF
M50 Mid Section/328i Backbox
328i Pink Injectors
ECU Remap, Custom Map to Suit Specific Engine Alterations
ACS Throttle Body Delete
Throttle Body Heater Delete
CCV (Crank Case Ventilation) Delete, Crankcase Breather, Manifold Plugged, Dipstick Vent Plugged
Eaton M45 Supercharger (to be replaced with M62 at later date) ,Intercooler, Custom Piping, Diverter ValveOV Hybrid (May change)
Direnza 50mm Aluminium Radiator w/ 14" Switch Operated Puller Fan
Suspension/Wheels:
Stance+ Fully Adjustable Coilovers, With Standard e36 Top Mounts
Custom X-Brace w/ Skid Plate
M3 Reinforced Suspension Top Mount Plates
Sway Bars, Front and Rear
Vented and Drilled Discs
Sport Brake Pads
Braided Brake Lines
17" E39 M Sport Alloys, 17x8 Front, 17x9 Rear
225x45x17 (Front), 245x40x17 (Rear)
Body:
25mm Widebody Fibreglass Quarter-Panels
M3 Front Bumper
Reiger GT Lip
328i Rear Diffuser
E36 GT Rear Spoiler
Rear Window Spoiler
Carbon Fibre Wrapped Bonnet
Interior:
OMP Deep Dish Steering Wheel
Sabelt RacerDuo Bucket Seat on FIA Approved Fixed Seat Rails
Boost Gauge attached to A Pillar
Radio Delete
Pics Attached
Thanks again to everyone who has looked/liked/commented on the various posts I have made over the course of this project. The support over the course has been incredible.
Cheers