Just picked up my Starion from my brake specialist as the front discs had warped after the last T D so had them replaced with DBA T3 Evo 4 rotors that had to be modified to fit ( redrilled to suit 4x114.5 pcd ) and as the rears were at their minimum thickness and after much searching found a new pair of rears ( like finding rocking horse poo as they are no longer made ) had the calipers serviced and new QFM 1ARM pads fitted and the system flushed with Penrite RBF 600 fluid so off today for a gentle bedding in of the pads as per QFM recommendations .
Have also replaced the HD adj front bar with the factory bar as was getting too much understeer/push when powering out of turns at Qld Raceway.
Will must likely have to replace the Federal 595 RSR's after that. Hand hits bottom of pocket again
Have also replaced the HD adj front bar with the factory bar as was getting too much understeer/push when powering out of turns at Qld Raceway.
Will must likely have to replace the Federal 595 RSR's after that. Hand hits bottom of pocket again