NoFatChicks
New member
How hot does the air usually get on the discharge side of a supercharger? I have felt the pipe after a fairly vigorous drive & the 3" Stainless pipe gets hot but not burn your hand hot or anything like that.
Blown BA Falcon 4.0 six cyl.
The reason I ask is that I have a very tight (& strange angled)Fiberglass bend made with Vinyl ester resin with aluminum tube sandwiched & keyed into the fiberglass at each opening. Everyone told me it might soften under the blower heat but I think i have gotten it as hot as it can get & nothing has softened yet & I don't think that it will because I hammered it non stop for about 80 minutes. The metal tube ends seems to takes care of the tight clamps & there is no softening there, so I think it will be OK.
what do you guys think?
Blown BA Falcon 4.0 six cyl.
The reason I ask is that I have a very tight (& strange angled)Fiberglass bend made with Vinyl ester resin with aluminum tube sandwiched & keyed into the fiberglass at each opening. Everyone told me it might soften under the blower heat but I think i have gotten it as hot as it can get & nothing has softened yet & I don't think that it will because I hammered it non stop for about 80 minutes. The metal tube ends seems to takes care of the tight clamps & there is no softening there, so I think it will be OK.
what do you guys think?