I have just had my modified rear suspension lower control arms outer mounting point lowered 2 inches/50 mm and my suspension gurus had to fit an offset bush to the inner mounting points to be able to adjust the toe to the correct setting.
The car has some built in toe adjustment but there must have been some slight movement when the mod was fabbed up
This mod is supposed to reduce the tendency of the rear end stepping out suddenly when applying power exiting corners.
I have had it checked and approved by a government approved engineer who has given me a blue modification plate to install in the engine bay so in the unlikely event that plod may question the roadworthyness I am in the clear.
I have also advised my insurer and it is noted on my file.
The car has some built in toe adjustment but there must have been some slight movement when the mod was fabbed up
This mod is supposed to reduce the tendency of the rear end stepping out suddenly when applying power exiting corners.
I have had it checked and approved by a government approved engineer who has given me a blue modification plate to install in the engine bay so in the unlikely event that plod may question the roadworthyness I am in the clear.
I have also advised my insurer and it is noted on my file.
Last edited: