Helloz

Geo

Full member
Points
21
Location
Cairo
Car
Daewoo Nubira
this is Geo :D
i am from cairo , egypt
so happy to join this community :amuse:
i have a daewoo nubira 97' stock one 1.5L 16v M/T
now am trying to get some mods and start tuning
 
Last edited:
May I as the site admin wish you a very warm welcome to TorqueCars. It is really nice to meet you and I hope you'll be spending some time with us over the months to come.
You'll find us one of the friendliest and most helpful car tuning forums around.

What plans do you have for your car? I'm sure we can give you lots of ideas and suggestions if you need any.

Do feel free to chip in on our other topics and discussions, we are all here to share our passion for cars. Being friendly and helpful is a forum rule here and I'm sure you'll fit in just fine.
 
May I as the site admin wish you a very warm welcome to TorqueCars. It is really nice to meet you and I hope you'll be spending some time with us over the months to come.
You'll find us one of the friendliest and most helpful car tuning forums around.

What plans do you have for your car? I'm sure we can give you lots of ideas and suggestions if you need any.

Do feel free to chip in on our other topics and discussions, we are all here to share our passion for cars. Being friendly and helpful is a forum rule here and I'm sure you'll fit in just fine.
nice to meet u too
this is much interesting :)

am looking to improve my car at all
improve performance by plugging K&N air filter , spark plugs and so on
my car is stock
any opinions ?
 
The best mods for a car engine are as follows.

Internal work yields the biggest gains, head work like porting polishing and 3 angle valve jobs will maximise the airflow and raise the power.

If you want to go to the max then cryo treat the block, get it rebored and look into blueprinting and balancing as well.

Bigger valves are an obvious addon but not all engines are suitable as it depends how close together the OEM valves are.

A fast road cam will yield good power gains, especially in the top end of the rev range. Don't go mad though a profile of up to 270 degrees will give the best gains without the engine becoming cammy.

The most popular power mods are induction kits (which are questionable as power mods but they can sound nice if that is your sort of thing) and sports exhausts with sports catalysts or decats.

To keep the car legal I'd recommend a sports catalyst rather than a decat.

The last mod should always be a remap as this will allow you to fully realise the power gains on offer from your mods.

It's worth having a read of the articles on www.torquecars.com/tuning/ for more information on these mods and what the terms mean.
 
The best mods for a car engine are as follows.

Internal work yields the biggest gains, head work like porting polishing and 3 angle valve jobs will maximise the airflow and raise the power.

If you want to go to the max then cryo treat the block, get it rebored and look into blueprinting and balancing as well.

Bigger valves are an obvious addon but not all engines are suitable as it depends how close together the OEM valves are.

A fast road cam will yield good power gains, especially in the top end of the rev range. Don't go mad though a profile of up to 270 degrees will give the best gains without the engine becoming cammy.

The most popular power mods are induction kits (which are questionable as power mods but they can sound nice if that is your sort of thing) and sports exhausts with sports catalysts or decats.

To keep the car legal I'd recommend a sports catalyst rather than a decat.

The last mod should always be a remap as this will allow you to fully realise the power gains on offer from your mods.

It's worth having a read of the articles on www.torquecars.com/tuning/ for more information on these mods and what the terms mean.

i think induction :D
i have decat
now i think remapping is better but in egypt i won't get the way to do that :sad2:
thnanks for ur efforts :)



Hi Geo, your last post went into the moderation queue because you quoted a member who posted up a URL link. New members are not allowed to post up any URL Links or photos until they have made at least 10 posts, this is done to deter spammers! I have seen what has happened here so I have approved it for you this time! Have a look around the site and get involved in some of the other members threads and you will soon hit 10 posts.

T9 man
Moderator.
 
tcsmileysign.gif
 

Please watch this on my YouTube channel & Subscribe.


Back
Top