Torque Cars

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.

    Learn More.
  2. Dismiss Notice

Greetings

Discussion in 'Say Hello & introduce yourself' started by Brunch007, 10 July 2018.

  1. Brunch007

    Brunch007 Newbie

    Messages:
    1
    From:
    Shepshed
    Car:
    Peugeot 806
    Hello I am new on this site. I have decided to pop a new engine into my Peugeot 806!!! Why you may ask?? Cause I want to turn it into a nice little sleeper. I am after some advice as to what engine would give me the most power with the least alterations. Would appreciate any advice. Cheers
     
  2. Lunchmoney

    Lunchmoney Torque Master

    Messages:
    917
    From:
    Poole, UK
    Car:
    '98 JDM Impreza STI
    Hello and welcome.

    These two are mutually exclusive when used to talk about a Peugeot 806.
    A whole new engine means more than just an engine. You will need gearbox, turbo (and/or supercharger), exhaust, fuel delivery (pump, lines and injectors), ECU, diff, suspension, brakes....

    There will likely be more, that is just of the top of my head.

    Are you mechanically minded at all? If so you will know all of that and the 100's of hours work ahead of you.
    If you are not I highly recommend you research your local garages and talk to an experienced mech about your end goals and what would be needed to achieve it.

    Good luck with your project, wave goodbye to your bank balance, and keep us updated on the work :)
     
    Last edited: 11 July 2018
    TCJBOLDIE likes this.
  3. TCJBOLDIE

    TCJBOLDIE Torque King

    Messages:
    4,274
    From:
    Brisbane
    Car:
    JB Starion
    Hi and welcome :)

    I agree with all of the above|B

    PS do your sums and if you come up with $$ then you will need $$$$ to finish the job :eek:
     
    Lunchmoney likes this.

Share This Page

Click Here