Search results

Idiots that installed the chip didn't correct the timing. Is it necessary to have it retuned now that the timing have been correcte

After driving the car on the open road this weekend, I have decided to remove the cam and put the standard back. At full throttle the car feels excellent, but when driving it normally it was better standards, it's not capable of keeping its speed on hills that wasn't a problem when it was...

I had my car remapped yesterday, made a massive difference. I still can't get it to idle though

When the engine temp goes a little high and the fan kick in, the car won't idle at all and the car have no power. Can this also be an timing issue?

Is it nessary to have a vernier pulley when taking it for a remap

No it's a SOHC 8v engine

I have made not changes to the engine except for the new camshaft. I am using the standard cam pulley and ecu. Is the loss of power I am experiencing because of the fact that the car haven't been remapped yet. When I installed the cam I had the valves reseated, is it possible that it might not...

The cam is made by a company in South Africa, called STK. It's a chilled cast cam. http://www.stk.co.za

When the car is idling the brakes is very hard as if the engine is not running at all

I installed a STK 264 cam in my Corsa C 1.4 over the weekend. Since then I am struggle to get the car to idle. I replaced the idle control valve and that made a huge difference. Once the car is on temperature the idling drops to around 450 RPM and I am unable to get it higher. Also I have lost a...

I am not sure if there is a sensor in the intake manifold, but there is nothing on the exhaust

The car don't have a Lambda sensor, Unless I don;t know about it. I cant see any airflow sensors on the intake or exhaust of the car

Yes it is running very rich

I have a 2007 1.4 Hyundai Getz. I had the head gasflowed and the cams reprofiled.The conversion removed 122cc on the intake ports and 95cc on the exhaust ports. The lifters was also replaced, but they are extremely noisy now. The car have a Wildcat branch and 50mm freeflow but its not chipped...