Rover 416SI saloon advice.
- Thread starter smithy123
- Start date
Couple of fast road cams, sports exhaust (Scorpion is my Rover Fave) and an induction kit (with a cold air feed) will do quite a bit for you. Those engines are pretty solid although can be a little Torque Shy low down - I guess thats the Honda heritage though. See what Moto-build have to offer in the way of cams.
For budget tuning get a panel air filter and cut 4 inch wide holes in the bottom of the air filter housing (use a spare from a breakers yard). If you are planning to change the engine then I would concentrate on suspension and handling mods for now.
For budget tuning get a panel air filter and cut 4 inch wide holes in the bottom of the air filter housing (use a spare from a breakers yard). If you are planning to change the engine then I would concentrate on suspension and handling mods for now.
Similar threads
| Thread starter | Title | Forum | Replies | Date |
|---|---|---|---|---|
|
rover 45 1.8l s with mg zs parts and few other mods | 400/45 | 0 | |
| N | Rover 45 Engine loom & matching ECU | 400/45 | 1 | |
| J | Rover 45 Hatch rear windscreen washer blocked | 400/45 | 5 | |
| H | Rover 45 - No compression in 1 cylinder | 400/45 | 17 | |
| B | Rover 45 1.6 tuning mods needed | 400/45 | 3 | |
| B | Rover 400 water problem | 400/45 | 18 |
Similar threads
